*Your
Name:
*Email
Address:
*Company
Name:
*Company
Address:
*Site
Address:
*Telephone:
*Fax:
*Manufacturer
of Dynamometer :
*Type
of Motor Power :
*Drive
Power :
*Max.
Speed at Full Power :
*Controllable
Speed Range :
*Do
you need to change gears or pulleys ?
*Main
motor drive electronics :
*Do
you need to replace this drive ?
*Type
of speed pickup :
*Inertia
range :
*Smallest
step in inertia sizes :
*Maximum
torque capability :
*Any
limitation on torque/speed with various flywheel combinations?
*Would
you like us to calculate the benefits achievable on your dyno with inertia
simulation ?
*Torque
measurement method :
*Is
rig capable of running in reverse ?
*Thermocouple
temperature measurement system : No. of channels :
*Method
of measurement of static friction.
*Cooling
system :
*Extraction
system :
Any
additional measurement channels :
*Is
the machine used for QA testing ?
*Is
the machine used for homologation ?
*Is
the machine used for research ?
Description
of any particular test procedures
Which
of the following are being tested Small samples :
Speed
of response of constant torque. You can leave this to be recommended by
Microface for the type of market you are selling in, or you can specify
your speed requirement in Hz, mSec or Bar/Sec. eg. 150 Bar/Sec for U.S.
market.
Special
Options for multiple head machines.
How
many test heads are fitted :
Do you
wish to do front/rear brake force distribution tests?
Do you
wish to sequence between test heads to, say, bed the brakes in on more
than one head at once ?
Any
special requirements not mentioned above, and any additional details, eg.
6 off bearing temperature monitoring.
